LED street light is difficult to dissipate heat? Easy to solve with thermal silica gel sheet

        Today, I want to share with you: the successful application cases of thermally conductive silicone sheets in the LED industry, such as: LED street lamps. Compared with other indoor lamps, the power of street lamps is much higher. In order to make LED lamps better heat dissipation, at the same time To increase the service life of the lamp, a thermally conductive silicone sheet with relatively high thermal conductivity is usually selected. First of all, one thing to know is: thermally conductive silicone sheet is applied between the aluminum substrate and the heat sink, conducting them to dissipate heat.

        At present, the heat dissipation material used by most LED street lamp manufacturers is thermally conductive silicone sheet. Thermally conductive silicone sheet is a good thermal interface material, it will not cure, soft and elastic, easy to operate, and can prevent the risk of short circuit. In addition, thermally conductive silicone sheet also has bonding function and high thermal conductivity, which is used for LED street lights today. Good material for heat dissipation.

        Advantages of thermally conductive silicone sheet:        

        1. The material is quite soft, with good compressibility and good insulation;        

        2. Wide controllable range and good maneuverability;        

        3. It has good stickiness and can stick quickly;        

        4. It can fully fill the gaps of the contact surface and conduct heat and air out.