What Is The Skive Fin Heatsink？

       Skive Fin are also known as SKIVING technology. Simply put, a piece of aluminum or copper is cut into fins with a standard pitch and a certain thickness and height through a special shovel machine as needed. Due to the use of high-precision cutting technology and integrated forming, compared with other processing techniques, the same volume of raw materials can cut a larger heat dissipation area, the heat transfer performance is more stable, and the heat dissipation efficiency can be increased by 10-30% compared with the insert radiator. Thereby greatly improving the heat dissipation efficiency and prolonging the service life of heating components.  Since the sprocket and the substrate are of the same material, there is no contact thermal resistance between the heat dissipation sprocket and the substrate. The ratio of the height of the sprocket to the spacing of the sprocket is very large (copper can reach 25, and aluminum can reach 60). The heat dissipation fins are thin and dense, which greatly increases the heat dissipation area. Even if the air volume is reduced, the radiator can still achieve a good heat dissipation effect, thereby greatly reducing the noise generated by the fan, and can dissipate a large amount of heat in a limited space to meet the heat dissipation requirements.

        Advantages of high-density Skive Fin radiator：

       (1) The Skive Fin radiator has a higher fin density, increases the heat dissipation area, and improves the heat dissipation performance;                     (2) The height of the blades of the Skive Fin radiator can reach 120mm, which fully meets the production requirements of most radiators; 

       (3) The teeth of the Skive Fin radiator can be made thinner, generally 1.5mm or even 1.0mm, which can make the radiator lighter;             

       (4) The Skive Fin  radiator is shoveled on the prototype material, so the heat dissipation efficiency is not damaged, reaching 100% of the heat dissipation efficiency of the prototype material, and there will be no risk of loosening and falling, improving the reliability of machine operation; 

       (5) The Skive Fin radiator has high compatibility, and the possibility of later processing is also great. It can also cooperate with the buried heat pipe process to improve the heat dissipation performance.