Breakthrough in LED cooling technology
Most of the existing ceiling lights use finned aluminum as the heatsink. The heat cooling effect of this kind of heat sink is not ideal, and the heat sink usually reaches a higher temperature.
1. Break through the problem of unsatisfactory heat cooling of the existing finned aluminum heatsink
Most of the existing ceiling lights use finned aluminum as the heat sink, and the heat dissipation effect of this type of heat sink is not ideal, and the heat sink usually reaches a relatively high temperature.
2. Use insulating and heat-dissipating plastic instead of aluminum alloy to make heat sink
South Korea has developed a kind of LED bio-conducting plastic in 2009, which can increase the heat radiation capacity by 4-8 times while keeping the heat dissipation capacity equal to that of aluminum alloy. The LED heat sink made of this heat dissipation material can greatly improve the overall heat dissipation effect.
3. Adopting the principle of liquid convection to provide a ceiling lamp with good heat dissipation performance
Utilize the heat absorbed from the lampshade by the coolant in the liquid storage tank installed on the lampshade, and at the same time use the natural convection of the coolant between two liquid storage tanks with different heights to dissipate the heat absorbed by the coolant from the lampshade , So that the lampshade of the ceiling hole lamp is well cooled.
4. Can be flexibly rotated, easy to install
Because the cooling liquid convection tube connected between the two liquid storage tanks has a bellows structure, and the bellows structure can be stretched and bent, it will not hinder the flexible rotation of the lampshade and is easy to install.
