The Introduction Of Skive Fin Heatsink

     Skive Fin is also called SKIVING technology.       

     To put it simply, a piece of aluminum or copper is cut into fins with a standard pitch and a certain thickness and height through a dedicated shovel as required. Due to the use of high-precision cutting technology and integrated molding, compared with other processing techniques, the same volume of raw materials can cut a larger heat dissipation area, the heat transfer performance is more stable, and the heat dissipation efficiency is higher. Compared with the plug-in radiator, it is reduced by 10%. -30%. Thereby, the heat dissipation efficiency is greatly improved, and the service life of the heating element is prolonged.       

     Since the sprocket and the substrate are made of the same material, there is no thermal contact resistance between the radiating sprocket and the substrate. The ratio of the sprocket height to the sprocket spacing is very large (up to 25 for copper and 60 for aluminum).       

     The heat dissipation fins are thin and dense, which greatly increases the heat dissipation area. Even if the air volume is reduced, the radiator can still achieve a good heat dissipation effect, thereby greatly reducing the noise generated by the fan, and can dissipate a large amount of heat in a limited space to meet the heat dissipation requirements.

     Advantages of high-density Skive Fin radiator:      

     (1) Skive Fin radiator has a higher fin density, which increases the heat dissipation area and improves the heat dissipation performance 

     (2) The height of Skive Fin radiator blades can reach 120mm, which fully meets the production requirements of most radiators      

     (3) Skive Fin radiator teeth can be made thinner, generally 1.5mm or even 1.0mm, which can make the radiator lighter      

     (4) Skive Fin radiator is shoveled on the prototype material, and the heat dissipation efficiency is not damaged, reaching 100% of the heat dissipation efficiency of the prototype material, without the risk of loosening and falling, and improving the reliability of machine operation      

     (5) Skive Fin radiator has high compatibility, and the possibility of later processing is also great. It can also be used with buried heat pipe technology to improve heat dissipation performance.