Skived Fin Heatsink

Copper skived fin heat sink offers highly optimized cooling as they allow for higher fin densities than what is manufacturable using extrusion methodologies, but do not have an interface joint...

Skived Fin Heat Sinks offer highly optimized cooling as they allow for higher fin densities than what is manufacturable using extrusion methodologies, but do not have an interface joint that...

Skiving fin heatsinks can be an alternative to extruded heatsinks when looking for a high fin density,high aspect ratio and thinner fin that can’t be achieved by extrusion technology. Skived...

A skived heatsink is manufactured using a skiving machine that uses a blade to cut material in thin slices, and then push the skived fin up. For a heatsink application, the manufacture of ultra...

Aluminum skived fins heat sink is manufactured by skiving machine with sharp blade that literally peels fins up from an extruded aluminum metal. This process of slicing and then lifting the fins...

Aluminum skiving fin heat sink is manufactured by peeling the individual sheets from a solid aluminum metal then lift it up and bend it vertically to form the skiving fins, skived fin heat sink...

Copper skived fin heat sink offers the ultimate thermal performance in forced air cooling. Power density per square inch is increasing while the space for a heat sink is limited, how to solve the...

A copper skived custom heatsink uses special cutting tools and a controlled shaving technique to produce a heatsink from a single block of copper material.The typical result is a thin-finned...

A skiving fin heatsink is manufactured by utilizing skiving process which uses a blade to slice the copper sheets, bend them vertically to form the skived fins, and interlock them with designed...

Aluminum skived fin heatsink is manufactured by utilizing skiving technology to slice the indiviual sheets and bend it vertically to be the skived fins and interlock them with designed space....

Skived fin heat sink is produced by SKIVING technology, basically, it is to peel the fins with a standard spacing and a certain thickness and height from a whole piece of aluminum or copper...

With the development of GPU chips, varieties of heat sink types are designed to meet the thermal requirements of the GPU chips, at the beginning, the power of the GPU chip is not high, so an...